Friction Tester

The COF-01, COF-01A and FPT-F1 devices measure the static and kinetic coefficient of friction of plastic films, sheets, paper, cardboard, fabrics, rubber and other materials. The PSPT-02 specifically measures the friction of catheters and guide wires in medical technology.

The COF-01 friction coefficient tester is the standard friction tester for every laboratory and is characterized by very high accuracy and is aligned to a total of four standards. For testing the coefficient of friction even at higher temperatures, the COF-01A model is suitable up to temperatures of 90°C.

The FPT-01 is a friction and peel-off tester that can test both static and dynamic coefficient of friction as well at elevated temperatures, as well as peel-off resistance of adhesive materials at 180° peel angle.

The BLD-01 is limited to pull-off resistance but can handle higher forces.

Overview of Testers for Friction and Peeling

Tester Temperatur Force Range Stroke (mm) Accuracy Speed Standards
RT – 90°C
5N opt.10, 30, 50 or 100 N 300 0,05% FS 100, 150 mm/min ISO 8295 ASTM D 1894
FPT-01 RT -100°C 5, 10, 30 N 300 0,1% FS 0,05-500 mm/min ASTM D1894, ISO 8295, ISO 8510-2, ASTM D4917
PSPT-02 0 – 95°C 10N, opt. 5, 30 or 50 N 600 0,01% FS 0,05-500 mm/min ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904
BLD-01 RT 30, 50, 100, 200 or 500 N 500 0,5% FS 0,05–1000 mm/min GB/T 4850-2002 GB 8808

Mobile Hardness Tester

Lpad H100/110/120, Lpad H210


  • For all steels and aluminium
  • All standards such as HL, HV, HRA, HRC, HRB, HB, HS
  • Accuracy: 0.5
  • Sensor type H100-120: D, DL
  • Sensor type H210: D, DL, D+15, DC, C, E, G
  • H110-120: Memory for 300 measurements
  • H210: USB stick storage


  • Good readability with OLED display
  • Easy portable pen design
  • All data readable at the workstation

Needle Tube Tester



  • Bending properties and strength of medical needle tubes and other materials.
  • For normal, thin and ultra-thin tubes
  • Load of 20 deflections
  • Visual examination of the fracture behaviour


  • Easy to perform
Bending Angle 15°, 20°, 25°
Needle Tube Diameter 0,2 – 3,4 mm
Load Frequency 0,5 Hz
Standards GB/T 18457-2015, ISO9626-1991, GB/T 15811-2016



  • Tests the stiffness of medical needles
  • For normal, thin and ultra-thin needles
  • Automatic calibration


  • Simple test procedure
Deflection 0 – 5 mm
Deflection Force 0 – 80 N
Deflection Speed 0 – 10 mm/min
Needle Diameter 0,3 – 3,4 mm
Standards GB 15811, YBB00092004-2015, GB 18457