Load Frame with Large Model Kit
The stresses in the components can be ideally demonstrated through this load frame placed in a polariscope. Tensile, compressive and bending forces can be applied. …
Specifications
Load frame Mechanical load frame for tension forces
Tension measurement analog ring dynamometer 10 kN
Models 5 models (without a notch, with a circular hole with…
Calibration The calibration of the dynamometers with a maximum load up to 100 kN is done with force measuring equipment at Tiedemann. The accuracy of our calibration device is certified periodically…
Calibration Table The determination of the calibration values (10 steady steps from zero to the maximum load) occurs according to the internal testing method following DIN 51301 (increasing and…
Important Instructions The calibrated dynamometers must not be modified after delivery. If the drawbar eyes for tensile forces or the seats for compressive forces are turned or removed, the rigidity…
Repair and Calibration Services According to DIN 51301, the testing certificate is valid for only 24 months. Therefore, it is recommended to recalibrate the device after this period.
Tiedemann will…
Auto-Nis scans and interprets the sensor film stripe up to a length of 12 m. It assimilates the data into a variety of easy to read graphical formats and displays of data. Often…
The type D systems comes each with 16 individual sensors. They are available in different sizes. All sensors are measured simultaneously. The calibration range will be customized same as with the…
Below we present some examples in detail:
ACF Bonding: This is a typical process for the production of LCD screens or solar panels. The individual joints can be easily checked and uniformity is…
